product standards tvs diode DY2L2A5C0L ? halogen-free / rohs compliant ? absolute maximum ratings note) *1: ta = tj = 25 *2: test method: iec61000-4-2 (c = 150 pf , r = 330 , contact discharge: 10 times) *3: test method: iec61000-4-2 (c = 150 pf , r = 330 , air discharge: 10 times) *4: test method: iec61000-4-5 (tp = 8/20 s , unrepeated) *5: power derating is necessary so that tj < 150 . (iec61000-4-2 pulse) page ? marking symbol: parameter ? packaging embossed type (thermo-compression sealing) : 20 000 pcs / reel (standard) fj symbol min max unit 1 of 5 internal connection D peak pulse current *1, 4 ipp 2.2 a peak pulse power *1, 4 ppp 16 w code operating junction temperature *5 tj panasonic dcsp0603010-n2 electrostatic discharge *1, 3 esd 15 kv jeita D electrostatic discharge *1, 2 esd 8 kv 1. anode 2. anode (eu rohs / ul-94 v-0 / msl: level 1 compliant) ? iec 61000-4-2 (esd) contact discharge 8 kv ? low clamping voltage ? low capacitance ? low leak current DY2L2A5C0L for bidirectional esd protection and transient voltage suppressor unit: mm ? iec 61000-4-2 (esd) air discharge 15 kv ? features 150 ambient temperature ta -40 150 storage temperature tstg -55 150 1 2 0.9 0.1 30ns 60ns 0.7 to 1ns 0% 100% % of peak current tp doc no. tt4-zz-02040 revision. 1 established : 2017-09-22 revised : 2018-06-27 downloaded from: http:///
product standards tvs diode DY2L2A5C0L (iec61000-4-5 pulse) (tlp pulse) input pulse note) 1. measuring methods are based on japanese industrial stan dard jis c 7031measuring methods for diodes. 2. absolute frequency of input and output is 5 mhz. 3. *1: vbr guaranteed 20 ms after current flow. *2: conditions : 8/20 s pulse waveform *3: conditions : tlp parameter z = 50 , tp = 100 ns , tr = 0.2ns , average window t1 = 54.4ns , t2 = 94.4ns ( magnified figure ) reverse leakage current @ vrwm test current breakdown voltage @ it page peak pulse current clamping voltage @ ipp reverse stand-off voltage 2 of 5 ir it vbr vrwm ipp vc parameter 35 m a 9.0 v clamping voltage *3 vc-tlp ipp = 8 a 10.8 v clamping voltage *2 symbol v vc ipp = 2.2 a, tp = 8/20 s 7.5 5.46 vbr it = 5 ma 4.74 5.10 min unit 2.5 v typ max reverse leakage current ir ? electrical characteristics ta = 25 3 parameter symbol conditions reverse breakdown voltage *1 reverse stand-off voltage vrwm D vr = 2.5 v pf clamping voltage *3 vc-tlp ipp = 16 a 17.5 v terminal capacitance ct vr = 0 v, f = 1 mhz 7.5 t t1 t2 peak value @8 s 20% half value @20 s 20% 50% 0% 100% 0 20 40 60 80 % of peak current tp [s] vc vc ipp ipp current voltage it current voltage vrwm vbr ir 0 10 tp tr t1 t2 average window tlp current i(t) v(t) tlp voltage v(t) or i(t) output pulse doc no. tt4-zz-02040 revision. 1 established : 2017-09-22 revised : 2018-06-27 downloaded from: http:///
product standards tvs diode DY2L2A5C0L note) *1: test condition : f = 1 mhz page 5 3 of typical characteristics at ta = 25 , unless otherwise specified reverse breakdown voltage reverse leakage current terminal capacitance *1 0.0 5.0 10.0 15.0 0 0.5 1 1.5 2 2.5 3 terminal capacitance [pf] reverse voltage [v] 1.0e-07 1.0e-06 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 1.0e+00 1 2 3 4 5 6 reverse current [a] reverse voltage [v] 1.0e-11 1.0e-10 1.0e-09 1.0e-08 1.0e-07 1.0e-06 1.0e-05 0 0.5 1 1.5 2 2.5 3 reverse current [a] reverse voltage [v] doc no. tt4-zz-02040 revision. 1 established : 2017-09-22 revised : 2018-06-27 downloaded from: http:///
product standards tvs diode DY2L2A5C0L note) *1: input pulse : note) *2: input pulse : iec61000-4-2 / contact / + 8 kv iec61000-4-2 / contact / - 8 kv note) *3: input : 8/20 s pulse waveform note) *4: input pulse : tp = 100ns , tr = 0.2ns , average window t1 = 54.4ns , t2 = 94.4ns extraction of rd using least squares fit of tlp characteristic between ipp = 10 a and ipp = 20 a . rd : dynamic resistance page 4 of 5 typical characteristics at ta = 25 , unless otherwise specified esd clamping *1 esd clamping *2 clamping voltage *3 tlp characteristic *4 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 120 output voltage [v] time [ns] -100 -80 -60 -40 -20 0 20 -20 0 20 40 60 80 100 120 output voltage [v] time [ns] v max = 78.4 v v 30ns = 14.0 v v min = -71.2 v v 30ns = -13.2 v 0 5 10 15 20 0 5 10 15 20 25 30 tlp current [a] tlp voltage [v] rd : 0.76 0.0 1.0 2.0 3.0 0 2 4 6 8 10 12 ipp [a] vc [v] doc no. tt4-zz-02040 revision. 1 established : 2017-09-22 revised : 2018-06-27 downloaded from: http:///
product standards tvs diode DY2L2A5C0L unit: mm unit: mm page dcsp0603010-n2 5 ? 5 of land pattern (reference) 0.215 0.215 0.4 0.3 doc no. tt4-zz-02040 revision. 1 established : 2017-09-22 revised : 2018-06-27 downloaded from: http:///
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-resident s, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to sh ow the main characteristics and application circuit examples of the products. no license is granted in and to any intellectual p roperty right or other right owned by panasonic corporation or any other c ompany. therefore, no responsibilit y is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information de-scribed in this book. (3) the products described in this book are intended to be used for general a pplications (such as office equipment, communications equipment, measuring instruments and household applian ces), or for specific applications as expressly stated in this book. please consult with our sales staff in advance for information on the follo wing applications, moreover please exchange documents separately on terms of use etc.: special applications (such as f or in-vehicle equipment, airplanes, aerospace, automotive equipment, traffic signal ing equipment, combustion equipme nt, medical equipment and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. unless exchanging documents on terms of use etc. in advance, it is to be unde rstood that our company shall not be held responsible for any damage incurred as a result of or in connection with you r using the products described in this book for any special application. (4) the products and product specific ations described in this book are sub ject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use o f the products, therefore, ask for the most up- to-date product standards in advance t o make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maxim um rating and the guaranteed operating conditions (operating power supply v oltage and operating environment et c.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power- on, power-off and mode-switching. other- wise, we will not be liable for any defect which may arise later in your equip ment. even when the products are used withi n the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures o n the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external fact ors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. we do not guarantee quality for disassembled p roducts or the product re-mounte d after removing from the mounting board. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) when reselling products described in this book to other companies with out our permission and receiving any claim of request from the resale destination, please understand that customers wi ll bear the burden. (8) this book may be not reprinted or reproduced whether wholly or partiall y, without the prior written permission of our company. no.010618 downloaded from: http:///
|
